Creality Space Pi Filament Drying Box, Two-Spool
£93.00 inc. VAT (£77.50 ex. VAT)
- Premium quality at just £93.00 inc. VAT
- Free UK delivery on every order
- 30-day no-quibble returns under Consumer Rights Act 2015
- Secure checkout with buyer protection on every purchase
Why Choose Creality Space UK
Conquer High British Humidity with Dual Spool Active Drying
In damp British indoor environments where humidity frequently exceeds 60% RH, hygroscopic 3D printing filaments absorb ambient water vapour within hours. This leads to popping noises during extrusion, excessive stringing, surface pitting, and fragile layer bonding. The Creality Space Pi Plus dual spool filament dryer box is purpose-built to solve these persistent printing failures. By holding two full 1kg filament rolls simultaneously, it delivers an uninterrupted workflow for dual-extrusion 3D printers, multi-colour print setups, or high-volume print farms across the UK.
360° PTC Hot Air Circulation & Smart One-Touch Presets
Equipped with a high-efficiency 160W PTC ceramic heating element and a built-in convection fan, the Creality Space Pi Plus rapidly circulates warm air throughout the chamber. Unlike passive dry boxes like the Polymaker PolyBox or basic single-spool heaters like the eSUN eBOX, the Space Pi Plus maintains an even internal thermal environment up to 70°C. With intuitive touch-screen controls, users can instantly select one-touch pre-set drying profiles for PLA (45°C), PETG (50°C), ABS (60°C), TPU (55°C), and Nylon/PA (70°C), or customize drying timers up to 48 hours.
Direct Printing Feed & Real-Time Environment Monitoring
Never interrupt your printing workflow again. The double spool filament drying station features multiple rubber-sealed PTFE tubing feed holes, allowing you to print directly from the active dry box while maintaining ultra-low humidity inside. The vibrant 4-inch digital touch display displays real-time internal temperature and relative humidity levels continuously, letting you monitor moisture reduction from ambient 75% RH down to below 15% RH. Complete with UKCA certification and a fused UK BS 1363 3-pin power cord, it is the ultimate upgrade for high-precision British 3D printing.
Technical Specifications
- Model Name
- Creality Space Pi Plus
- Heating Power
- 160W PTC Hot Air System
- Temperature Range
- 45°C to 70°C (±2°C accuracy)
- Spool Capacity
- Dual Spools (Up to 2× 1kg / 200mm diameter)
- Filament Compatibility
- 1.75mm, 2.85mm, 3.00mm (PLA, PETG, ABS, TPU, Nylon)
- Display
- 4-inch Touchscreen LCD Real-time Temp & RH
- Timer Range
- 1 to 48 Hours Continuous Drying
- Feed Outlets
- 4× Sealed PTFE Guide Outlets
- Power Input
- AC 220-240V 50Hz (UK Plug)
- Safety Certifications
- UKCA, CE, RoHS, Fused BS 1363 Plug
Price Comparison
See how our price compares across UK retailers
| Retailer | Price | Delivery | Warranty |
|---|---|---|---|
| Creality Space UK UK (Specialist)BEST | £93.00 | FREE | 12 months + UK Support |
| eBay (est.) | £116.25 | Varies | Seller dependent |
| High Street RRP | £148.80 | N/A | Varies |
Prices checked 5 August 2026. Prices may vary.
Customer Reviews
Living near the Severn Estuary, room humidity in my workshop is a constant nightmarish 70%. My PETG prints were stringing badly. The Creality Space Pi Plus brought chamber RH down to 12% in under half an hour. Dual spool capacity means I can run dual-colour prints without swapping rolls!
As an engineering consultant printing prototype nylon gears, moisture control is non-negotiable. The 70°C PTC heating profile on the Space Pi Plus dries PA6-CF thoroughly. The direct PTFE tube feeding keeps filament dry straight into my Bambu Lab printer.
I upgraded from a cheap single spool Sunlu S2. Having two 1kg spools drying at once is a game changer for multi-material printing with PVA support filaments. Super quiet fan operation and sleek touchscreen design.
Extremely effective dryer. Took my wet TPU from stringy mess to silky smooth prints overnight. My only minor gripe is that it takes about 15 minutes to reach full 70°C heat, but once it gets there it stays rock solid.
Delivered next day from Manchester with a proper UK 3-pin plug. Real-time humidity readout is very accurate compared to my standalone hygrometer. Fantastic value compared to bulkier 4-spool print farm dryers.
Scottish winter humidity made 3D printing practically impossible in my unheated garage studio. This active box keeps my PLA and PETG dry at 45°C. Fits two standard 1kg Hatchbox and eSUN spools comfortably.
The pre-set profiles make it foolproof. Tap PETG, press start, and print directly through the feed tube. Layer adhesion on my mechanical parts has improved tenfold.